I have a brand new Grizzly G0695 knee mill. I was in the process of spindle break-in as outlined in the manual, 200rpm in each direction for 20 min and 1800rpm in each direction for 20 min. When I wound it up to 1800 I could hear and feel a strong vibration throughout the head along with some squeeking (belt slippage or bearings). I removed the drive belt and ran the motor free. At about 1500rpms the motor had a pretty high freq vibration.....not a hum but a buzz/rattle. I have a cogged...
G0695 Mill Vibration Issues! I Need Guidance....
G0695 Mill Vibration Issues! I Need Guidance....
