M1-570 End Mill Driver
Hi fellow machinist, does anyone have atlas M1-570 end mill driver dimensions or a drawing? I'd like to make this item. thanks, Clifton Davis here in Illinois
View ArticleCoolant Drain In Chip Pan?
I would like some opinions. I have a 10"Logan bench lathe. I am currently making a set of legs similar to the ones Logan sold as an accessory and will be mounting them soon, along with a Logan chip pan...
View ArticleClean Up Of Early Clausing 100 Mkiii Standard Lathe.
Picked up a nice dirty Clausing for $500. Thanks to all who helped with ID and advice. It was in a basement shop of a condemned house. Was being used for turning wood so it was covered in sawdust....
View ArticleSwiveling Holder
will go to a side view or top down view View attachment 132221 View attachment 132223 View attachment 132222 Charl
View ArticleGrinding Form Tools On A Gorton 375
Hi all, I have a very nice Gorton single lip grinder, model 375-2, which i picked up at auction a while back. I finally got around to cleaning it up and playing with it. I'd like to use it for...
View ArticleSome Pictures Of The Pm-1228vf-lb
Have some pictures of the 1228 that people have been asking for, just a few pics that are interesting to look at. Shipment is on the way in, we will have better pictures then.
View ArticleTool Post Jack Video
Im not sure I understand exactly how this project area is supposed to work but, I made a little video of a simple little tool post Jack that I made. This is actually the third one I have made....
View ArticleThe Little Jet Lathe That Just Might Could
For your reading enjoyment here is a little lathe that just might could. Ulma Doctor sourced this jewel from his AO and it is heading to TX soon. This is the Taiwanese made Jet 1024P, a smallish, but...
View ArticleHydrashift Lathe
Found a 12 1/2" x 36" Cincinnati hydrashift lathe for sale, it's in kit form. Guy wants $300, and says every thing is there. It's 45 min away. Any thoughts, good or bad? I don't really need it, but it...
View ArticleClik here to view.
Cincinnati Lathe
There is very little information on the internet about this lathe that I purchased this weekend. I haven't found a serial or model number under the rust yet, it's about a 16". I believe it can be...
View ArticleHf8x12
Hi Fellow Gadgeteers, As you all know I have a Taig Lathe and Mill along with other misc stuff. I really like my lathe and wouldn't get rid of it. Problem is that it's pretty small and I think a larger...
View ArticleWindows 7
Things I like about Windows 7..................................................................................
View ArticleReplacement Motor For 14x40 Lathe
I've been digging around the archives, but I still haven't found exactly what I need to know. I suspect it's because I don't really know a whole lot about AC motors in the first place. Enough to mount...
View ArticleHeavy Rotary Table On Drill Press Table
Hi all, I have a 1970 powermatic 1150 drill press, and a gorton 8-1/2D mill that sit more or less side-by-side. I have a 10" rotary table that is too heavy and unwieldy to be easily lugged onto the...
View ArticleWhich Shim Stock
I need to correct my tailstock's vertical alignment. It's down just shy of 0.01". I must admit I forgot to check vertical alignment on it after refurbishing the lathe and started actually using it. Now...
View ArticleMissing Posts
I noticed yesterday that when I open a thread (not all threads) some of the posts would be missing---if I go back and open the thread again normally the missing posts will be there. Anyone else having...
View ArticleNeed some one-shot tubing for BP 815.. any particular source?
I need to finish up 1 last part of the bridgeport 815 surface grinder I bought and fixed up. Is there any particular type of tube use on the one-shot oilers? It's a can w/ a big handle to a junction...
View ArticleSouth Bend 9a Restoration (pic Heavy)
A month ago I brought home my first lathe- a 1941 South Bend 9a. I didn't really intend to do a full restoration on it right away since I'm itching to start turning, but one thing lead to another and...
View ArticleClik here to view.
Add Grease To Steel Gears In Hf Mill?
Recently picked up a HF 44991 mill used, complete with a set of broken spindle gears. I ordered up a set of the LMS steel gears to replace them (yeah, yeah, I know...should have went belt drive I just...
View ArticlePM-45M-CNC Setup and Configuration with Mach3
I figured we could use a thread specific to configuration of the Precision Mathews 45M-CNC. This will make it easier for people to find from searches in the future. I have attached my XML configuration...
View Article